Connection Profiles

Save Wi-Fi networks and NTRIP/VRS services as named profiles. Switch between an office network, phone hotspot, or correction service without retyping credentials.

Saving a profile

1. In the Web UI settings page, open Configure under Access Point (for WiFi) or Configure under Remote VRS (for NTRIP).
2. Fill in the connection details as usual.
3. Optionally give the profile a name — left blank, WiFi profiles take the network name and VRS profiles take the mount point name.
4. Press Save Profile & Use. The profile is stored and immediately becomes the active configuration.

Up to 12 profiles of each kind can be stored.

Switching profiles

Choose a saved Profile to use it for Connect Now, Connect on Boot, and automatic reconnection. The dropdown shows which profile matches the current settings.

To remove a profile, select it and press the ✕ button beside the dropdown.

Pasting RoboGNSS credentials

Paste RoboGNSS-format credentials into Or paste credentials in the VRS form. Each block becomes a saved profile; the first is applied immediately.

Keep Retrying

Use Keep Retrying, next to Connect On Boot, to control what happens after Wi-Fi disconnects:

• Off (default): if the WiFi network drops, the RoboDot returns to its own RoboDot_<serial> access point and stays there — walk over, connect, and the web UI is waiting.
• On: the device keeps trying to rejoin the saved network. Useful for permanent base installations.